RMU build Gen-1.5: II. Teleport - A. Create Teleport CT

This page is part of the Gen-1.5 RMU build runbook.

Go back to the previous section: II. Proxmox - E. Add LAN Network Device

A. Create Teleport CT

1. From the main Proxmox page, select Create CT (the top right) to launch the Create: LXC Container dialog window.
2. Tick the Advanced box and then enter CT ID of 122, set Hostname to <dc>-teleport, create a non-trivial password for user rootand save in your password manager under <dc> Teleport and optionally add your ssh public key. Select Next.
3. Select the ubuntu-22.04-standard template. Select Next.
4. Accept the default disk size. Select Next.
5. Set cores to 4. Select Next.
6. Set the Memory and Swap to 2048. Select Next.
7. Set the Bridge to vmbr1 (LAN)
   • uncheck the Firewall option
   • set the IPv4 to Static with an IP of 10.10.100.22/24 (CIDR is required)
   • Set Gateway to 10.10.100.1
   • set the IPv6 to SLAAC. Select Next.
8. No changes are required for the DNStab. Select Next.

Continue to next section: B. Install Teleport Software

Go to the index of the Gen-1.5 RMU build runbook.