RMU build Gen-1.5: III. Maas - E. Configure CHCP Subnet on MaaS

This page is part of the Gen-1.5 RMU build runbook.

Go back to the previous section: D. Initial Configuration of Maas Server

E. Configure CHCP Subnet on MaaS

1. Select Subnets in the top Navigation Bar
2. Select 10.10.100.0/24
3. Select Reserve Range > Reserve dynamic range
4. Set Start IP address to 10.10.100.53
5. Set End IP address to 10.10.100.99
6. Select Reserve
7. Select Subnets in the top Navigation Bar
8. Select untagged
9. Select Configure DHCP
10. Ensure that MAAS provides DHCP is ticked
11. Select Provide DHCP from rack controller(s)
12. In the Rack controller dropdown select <dc>-maas and select Configure DHCP

Continue to next section: IV. Best Practices - A. Recommended: Proxmox Security

Go to the index of the Gen-1.5 RMU build runbook.