RMU build Gen-1.5: III. Maas - E. Configure CHCP Subnet on MaaS

This page is part of the Gen-1.5 RMU build runbook.

Go back to the previous section: D. Initial Configuration of Maas Server

E. Configure DHCP Subnet on MaaS

1. Select Subnets in the top Navigation Bar
2. Select 10.10.100.0/24
   • 
3. Select Reserve Range > Reserve dynamic range
   • 
4. Set Start IP address to 10.10.100.53
5. Set End IP address to 10.10.100.99
6. Select Reserve
   • 
7. Select Subnets in the top Navigation Bar
8. Select untagged
   • 
9. Select Configure DHCP
   • 
10. Ensure that MAAS provides DHCP is ticked
11. Select Provide DHCP from rack controller(s)
12. In the Rack controller dropdown select <dc>-maas and select Configure DHCP
    • 

Continue to next section: IV. Best Practices - A. Proxmox Security

Go to the index of the Gen-1.5 RMU build runbook.