Difference between revisions of "RMU build Gen-1.5: II. Proxmox - E. Add LAN Network Device"
From Internet Computer Wiki
Katie.peters (talk | contribs) |
Katie.peters (talk | contribs) |
||
Line 29: | Line 29: | ||
#After saving the file, in the shell run: <code>cat /proc/sys/net/ipv4/ip_forward</code> | #After saving the file, in the shell run: <code>cat /proc/sys/net/ipv4/ip_forward</code> | ||
#*(result should be "<code>0</code>") | #*(result should be "<code>0</code>") | ||
− | #Run: <code>ifup vmbr1</code> <code>cat /proc/sys/net/ipv4/ip_forward</code> | + | #*Run: <code>ifup vmbr1</code> <code>cat /proc/sys/net/ipv4/ip_forward</code> |
#*(result should be "<code>1</code>") | #*(result should be "<code>1</code>") | ||
#*[[File:Screenshot 2023-10-30 at 2.49.13 PM.png]] | #*[[File:Screenshot 2023-10-30 at 2.49.13 PM.png]] |
Latest revision as of 18:36, 23 February 2024
This page is part of the Gen-1.5 RMU build runbook.
Go back to the previous section: D. Download ISO Images
E. Add LAN Network Device
- Select
RMU
>Network
- Select
Create
>Linux Bridge
- Bridge
vmbr1
with IP10.10.100.1/24
(CIDR is required) on Bridge porteno2
, commentLAN
- Create another Bridge and set Name to
vmbr2
with IPempty
on Bridge porteno5
, commentWAN
. - After creating the bridge, select the
Apply Configuration
button - Select your RMU device on the left side. (Note: Everything below this step is not needed when creating the linux bridge vmbr2)
- Select
Shell
- Open the following file with your favorite text editor (vi, nano, emacs etc)
/etc/network/interfaces
- Add the following lines at the end of the
vmbr1
section (before theLAN
comment):- Ensure that the spacing is correct:
post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp --dport 443 -j DNAT --to 10.10.100.22:443 post-up iptables -t nat -A POSTROUTING -s '10.10.100.0/24' -o vmbr0 -j MASQUERADE post-down iptables -t nat -A POSTROUTING -s '10.10.100.0/24' -o vmbr0 -j MASQUERADE
- Save and quit the file.
- After saving the file, in the shell run:
cat /proc/sys/net/ipv4/ip_forward
Continue to next section: II. Teleport - A. Create Teleport CT
Go to the index of the Gen-1.5 RMU build runbook.