RMU build Gen-1.5: II. Proxmox - B. Update Proxmox

This page is part of the Gen-1.5 RMU build runbook.

Go back to the previous section: A. Install Proxmox

B. Update Proxmox

1. Browse to the public IP address of Proxmox (the one set during installation). Once Proxmox is installed and reachable, the rest can be done remotely.
2. Enter in the Username root and password you setup during the proxmox install.
   • 
3. If you do not have a Proxmox subscription, you need to disable the Enterprise repo and add the No-Subscription repo.
4. Select your RMU device on the left side of the screen.
5. Expand Updates, and select Repositories.
6. Select the enterprise.proxmox.com/debian/pve repo and then select the Disable button.
7. Disable the enterprise.proxmox.com/debian/ceph-quincy repo.
   • 
8. Add the No-Subscription repo by selecting the Add button and selecting the No-Subscription option from the Repository drop-down.
   • 
9. Next step is to update the repository packages and then update the system.
   • 
10. On the Updates tab, select the Refresh button and click through the “no license” dialog (if it pops up).
    • Close the dialog window when this completes.
    • 
11. Update the system by selecting the Upgrade button and then entering “Y” in the resulting pop-up terminal window.
    • 
12. When the update completes, reboot the node.
    1. Enter the command shutdown -r now.
13. The whole machine will reboot, please give it a few minutes before proceeding to the next step.
    • 

Continue to next section: C. Download CT Templates

Go to the index of the Gen-1.5 RMU build runbook.