Seed participant configuration with DFINITY Canister SDK

From Internet Computer Wiki
Jump to: navigation, search

Introduction

Steps to configure a neuron using the DFINITY Canistr SDK.

Warning

This process is not currently possible on macOS computers with M1 chips. You can only install the DFINITY Canister SDK dfx and the Candid compiler didc on Intel-based macOS and Linux computers.

Step 1: Derive a native Internet Computer principal from your Ethereum seed

As an early contributor or seed donor, Seed participants wrote down a 12-word mnemonic seed phrase that was generated by the DFINITY Chrome extension. To create an identity, seed participants must derive a private key from their seed phrase and import that private key into the DFINITY Canister SDK. This step is required before seed participants can take control of their neurons.

Step 1a: Secure your environment

The safety and security of the seed participant's private key is their responsibility and there is no substitute for planning ahead, bringing the right equipment, having the right skills, and using good judgment. It is strongly recommended they proceed using an air-gapped computer to reduce the risk of having their private key compromised. Depending on the hardware available, they might want to physically remove the network controller, microphone, speakers, and other components, or disable them in their BIOS. Covert channels can be established through a variety of different mediums, including sound, light, radio-frequency, and physical media. Be sure to evaluate the capabilities of your system before settling on a configuration that makes sense for you. If one is unsure, one should consult with a computer security expert. Do not contact the DFINITY Foundation for help with securing your environment.

Step 1b: Install Keysmith

You need Keysmith to derive your private/public key pair from the seed phrase.

To install Keysmith, there are two options:

a. Fetch the release binary or b. Build Keysmith from source.

Option A: Fetch the release binary

=====Verify the SHA256 checksum of your download====+

Option B: Build Keysmith from source

Step 1c: Install the DFINITY Canister SDK

Step 1d: Set your seed phrase for use with keysmith

Step 1e: Check your legacy address and balance (optional)

Step 1f: Derive and import your private key

Step 2: Take control of your neurons

Step 3: Enable disbursal by passing the KYC process

Step 4: Instruct the neurons you wish to unstake to dissolve

Step 5: Disburse ICP from neurons that are fully dissolved