RMU build Gen-1.5: IV. Best Practices - D. Update Firmware on SuperMicro Nodes

From Internet Computer Wiki
Revision as of 21:12, 29 February 2024 by Katie.peters (talk | contribs) (Created page with "This page is part of the Gen-1.5 RMU build runbook. Go back to the previous section: RMU build Gen-1.5: IV. Best Practices - C. Dell OpenManage Enterprise|C. Dell OpenManag...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page is part of the Gen-1.5 RMU build runbook.

Go back to the previous section: C. Dell OpenManage Enterprise

D. Update Firmware on SuperMicro Nodes (Recommended)

  1. Open and Log into a BMC of the SuperMicro you wish to update
  2. Select System > FRU Reading

Screenshot 2024-01-03 at 3.14.58 PM.png

  1. Find the Board Product name on this page

[[File::Screenshot 2024-01-03 at 3.15.29 PM.png]]

  1. Using the Board Product Name, search for the latest firmware on SuperMicros website. https://www.supermicro.com/support/resources/bios_ipmi.php?type=BMC
  2. Once you have located your motherboard, Select Resources
  3. Under Software Select BMC Firmware
  4. Download it and Extract it
  5. Go back to the BMC and select Maintenance > Firmware Update
  6. Select Enter Update Mode
  7. In the Confirm Window Select Yes
  8. Select Upload Firmware
  9. In the Confirm Window Select Yes
  10. Uncheck Preserve Configuration (Unchecking this option will restore the BMC's factory default setting.)
  11. Select Start Upgrade NOTE: After the firmware update is complete, you will need to clear the cache of any browser that had previously connected with that BMC Web Console.


Continue to next section: E. Enable Remote Access to Servers Console

Go to the index of the Gen-1.5 RMU build runbook.

Retrieved from "https://wiki.internetcomputer.org/w/index.php?title=RMU_build_Gen-1.5:_IV._Best_Practices_-_D._Update_Firmware_on_SuperMicro_Nodes&oldid=7529"