Difference between revisions of "RMU build Gen-1.5: III. Maas - E. Configure CHCP Subnet on MaaS"

Revision as of 19:45, 26 February 2024

This page is part of the Gen-1.5 RMU build runbook.

Go back to the previous section: D. Initial Configuration of Maas Server

E. Configure CHCP Subnet on MaaS

Select Subnets in the top Navigation Bar
Select 10.10.100.0/24
Select Reserve Range > Reserve dynamic range
Set Start IP address to 10.10.100.53
Set End IP address to 10.10.100.99
Select Reserve
Select Subnets in the top Navigation Bar
Select untagged
Select Configure DHCP
Ensure that MAAS provides DHCP is ticked
Select Provide DHCP from rack controller(s)
In the Rack controller dropdown select <dc>-maas and select Configure DHCP

Continue to next section: IV. Best Practices - A. Recommended: Proxmox Security

Go to the index of the Gen-1.5 RMU build runbook.

@@ Line 6: / Line 6: @@
 # Select <code>Subnets</code> in the top Navigation Bar
 # Select <code>10.10.100.0/24</code>
-#*
+#*[[File:Screenshot 2024-01-05 at 12.32.48 PM.png|800px]]
-# Select <code>Reserve Range</code> > <code>Reserve dynamic range</code>
+#Select <code>Reserve Range</code> > <code>Reserve dynamic range</code>
-# Set <code>Start IP address</code> to <code>10.10.100.53</code>
+#*[[File:Screenshot 2024-01-05 at 12.33.59 PM.png|alt=]]
-# Set <code>End IP address</code> to <code>10.10.100.99</code>
+#Set <code>Start IP address</code> to <code>10.10.100.53</code>
-# Select <code>Reserve</code>
+#Set <code>End IP address</code> to <code>10.10.100.99</code>
+#Select <code>Reserve</code>
+#*[[File:Screenshot 2024-01-05 at 12.35.41 PM.png|800px]]
 # Select <code>Subnets</code> in the top Navigation Bar
-# Select <code>untagged</code>
+#Select <code>untagged</code>
-# Select <code>Configure DHCP</code>
+#*[[File:Screenshot 2024-01-05 at 12.32.48 PM.png|800px]]
+#Select <code>Configure DHCP</code>
+#*[[File:Screenshot 2024-01-05 at 12.41.42 PM.png|800px]]
 # Ensure that <code>MAAS provides DHCP</code> is ticked
-# Select <code>Provide DHCP from rack controller(s)</code>
+#Select <code>Provide DHCP from rack controller(s)</code>
-# In the <code>Rack controller</code> dropdown select <code><dc>-maas</code> and select <code>Configure DHCP</code>
+#In the <code>Rack controller</code> dropdown select <code><dc>-maas</code> and select <code>Configure DHCP</code>
+#*[[File:Screenshot 2024-01-05 at 12.45.04 PM.png]]
 ==Continue to next section: [[RMU build Gen-1.5: IV. Best Practices - A. Recommended: Proxmox Security|IV. Best Practices - A. Recommended: Proxmox Security]]==
 Go to the index of the [[RMU build Gen-1.5|Gen-1.5 RMU build runbook]].