Node Provider Machine Hardware Guide
From Internet Computer Wiki
Revision as of 12:36, 21 July 2022 by Katie.peters (talk | contribs)
What are the Hardware Requirements to be a Node Provider?
Presented here are the hardware requirements for all nodes that were purchased prior to Genesis.
Hardware requirements for new nodes are currently https://forum.dfinity.org/t/draft-motion-proposal-new-hardware-specification-and-remuneration-for-ic-nodes/14202 as they must be approved by the NNS.
Gen-1
Dell Core Compute With Storage Upgrade
Node Type 1; Dell
| 1 | R6525 |
| 1 | Chassis - Supports Up to 10 NVMe drives, 12 drives total |
| 1 | Dual 1 GB on Motherboard |
| 3 | Low Profile PCIe Slots |
| - | 3 Year Basic NBD Support |
| - | iDrac Enterprise |
| 1 | Dual port 10GbE Base - T Adapter Broadcom, PCIe Low Profile |
| 10 | 3.2TB NVMe, Mixed Use, 2.5" with Carrier |
| 16 | 32GB RDIMM (3200MT/s) |
| 2 | AMD 7302 3GHz, 16C/32T, 128M, 155W, 3200 |
| 1 | Single Power Supply (800W) |
| 1 | C13-C14, 3M, 125V 15A Power Cored |
Node Type 1; SuperMicro
| 1 | AS - 1023US - TR4 |
| 2 | Rome 7302 DP/UP 16C/32T 3.0 |
| 16 | 32GB DDR4-3200 2Rx4 ECC REG DIMM |
| 5 | Samsung PM983 3.2TB NVMe PCIE/SATA Hybrid M.2 & 1 PCIE |
| 2 | 800W Power Supply |
| 1 | Std LP 2-port 10G RJ45, Intel x540 |
| 5 | Micron 5300 PRO 7.4TB, SATA, 2.5', 3D TLC, .6DWPD (with Caddie) |
| 1 | C13/C14 13A Power Cord |
Node Type 2; Dell
| 1 | R6515 |
| 1 | 3.5" Chassis with up to 4 Hot-Plug Hard Drives and OS RAID |
| 1 | Dual 1 Gb on Motherboard |
| 3 | Low Profile PCIe Slots |
| 1 | Standard Fan |
| - | 3 Year Basic NBD Support |
| - | iDrac Enterprise |
| 2 | Dual Port 10GbE Base - T Adapter Broadcom, PCIe LOw Profile |
| 2 | 480GB SSD SATA Mix Use 6Gbps 512 2.5in Hot-Plug AG Drive, 3.5in |
| 4 | 8GB RDIMM, 3200 MT/s, Single Rank |
| 1 | AMD EPYC 7232P 3.10GHz, 8C/16T, 64M Cache (120W) DDR4-3200 |
| 1 | Dual Hot-Plug Redundant Power Supply (1+1), 550W |
| 2 | Jumper Cord - C13/C14, .6M, 250V, 13A |