Difference between revisions of "Node Provider Machine Hardware Guide"
From Internet Computer Wiki
Gary.mcelroy (talk | contribs) (→Gen 2: Added Gigabyte configuration) |
Gary.mcelroy (talk | contribs) (Added Supermicro validated configuration and clarification of what NP's are expected to purchase.) |
||
| Line 83: | Line 83: | ||
== Gen 2 == | == Gen 2 == | ||
| + | |||
=== Generic specification === | === Generic specification === | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 98: | Line 99: | ||
|} | |} | ||
<br> | <br> | ||
| − | === Validated configuration: ASUS === | + | === Validated Configurations === |
| + | DFINITY has [https://forum.dfinity.org/t/draft-motion-proposal-new-hardware-specification-and-remuneration-for-ic-nodes/14202/14?u=garym validated] the following Gen2 hardware configurations. Some exceed the minimum spec, but new node hardware purchased to use on the IC doesn't need to have such beefy specs. Machines which meet the minimum requirements are sufficient. | ||
| + | <br><br> | ||
| + | ==== Validated configuration: ASUS ==== | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 114: | Line 118: | ||
|} | |} | ||
<br> | <br> | ||
| − | === Validated configuration: Gigabyte === | + | ==== Validated configuration: Gigabyte ==== |
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 128: | Line 132: | ||
|- | |- | ||
| 1 || Dual Ethernet Intel I350 Gigabit Network Connection | | 1 || Dual Ethernet Intel I350 Gigabit Network Connection | ||
| + | |} | ||
| + | <br> | ||
| + | ==== Validated configuration: Supermicro ==== | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | 1 || Supermicro AS-1124US-TNRP 1U Rackmount Server | ||
| + | |- | ||
| + | | 2 || AMD EPYC 7543 32-Core Processor 2.8 GHz, 225W | ||
| + | |- | ||
| + | | 16 || 64GB 3200MHz DDR4 RDIMM | ||
| + | |- | ||
| + | | 10 || 7.68TB Micron NVMe SSD | ||
| + | |- | ||
| + | | 2 || 1200W Redundant PSU 80 Plus Platinum Level | ||
| + | |- | ||
| + | | 1 || Dual Ethernet Intel X710 10GBASE-T Network Adapter | ||
|} | |} | ||
Revision as of 00:41, 22 October 2022
What are the Hardware Requirements to be a Node Provider?
Hardware requirements are specified for all nodes that were purchased prior to Genesis - these are 'Gen 1'.
Gen 2 hardware requirements are currently under discussion as they must be approved by the NNS.
Gen 1
Node Type 1 - Dell
| 1 | R6525 |
| 1 | Chassis - Supports Up to 10 NVMe drives, 12 drives total |
| 1 | Dual 1 GB on Motherboard |
| 3 | Low Profile PCIe Slots |
| - | 3 Year Basic NBD Support |
| - | iDrac Enterprise |
| 1 | Dual port 10GbE Base - T Adapter Broadcom, PCIe Low Profile |
| 10 | 3.2TB NVMe, Mixed Use, 2.5" with Carrier |
| 16 | 32GB RDIMM (3200MT/s) |
| 2 | AMD 7302 3GHz, 16C/32T, 128M, 155W, 3200 |
| 1 | Single Power Supply (800W) |
| 1 | C13-C14, 3M, 125V 15A Power Cored |
Node Type 1 - SuperMicro
| 1 | AS - 1023US - TR4 |
| 2 | Rome 7302 DP/UP 16C/32T 3.0 |
| 16 | 32GB DDR4-3200 2Rx4 ECC REG DIMM |
| 5 | Samsung PM983 3.2TB NVMe PCIE/SATA Hybrid M.2 & 1 PCIE |
| 2 | 800W Power Supply |
| 1 | Std LP 2-port 10G RJ45, Intel x540 |
| 5 | Micron 5300 PRO 7.4TB, SATA, 2.5', 3D TLC, .6DWPD (with Caddie) |
| 1 | C13/C14 13A Power Cord |
Node Type 2 - Dell
| 1 | R6515 |
| 1 | 3.5" Chassis with up to 4 Hot-Plug Hard Drives and OS RAID |
| 1 | Dual 1 Gb on Motherboard |
| 3 | Low Profile PCIe Slots |
| 1 | Standard Fan |
| - | 3 Year Basic NBD Support |
| - | iDrac Enterprise |
| 2 | Dual Port 10GbE Base - T Adapter Broadcom, PCIe LOw Profile |
| 2 | 480GB SSD SATA Mix Use 6Gbps 512 2.5in Hot-Plug AG Drive, 3.5in |
| 4 | 8GB RDIMM, 3200 MT/s, Single Rank |
| 1 | AMD EPYC 7232P 3.10GHz, 8C/16T, 64M Cache (120W) DDR4-3200 |
| 1 | Dual Hot-Plug Redundant Power Supply (1+1), 550W |
| 2 | Jumper Cord - C13/C14, .6M, 250V, 13A |
Gen 2
Generic specification
| Dual Socket AMD EPYC 7313 Milan 16C/32T 3 Ghz, 32K/512K/128M
optionally 7343, 7373, 73F3 |
| 16x 32GB RDIMM, 3200MT/s, Dual Rank |
| 5x 6.4TB NVMe Mixed Mode |
| Dual Port 10G SFP or BASE-T |
| TPM 2.0 |
Validated Configurations
DFINITY has validated the following Gen2 hardware configurations. Some exceed the minimum spec, but new node hardware purchased to use on the IC doesn't need to have such beefy specs. Machines which meet the minimum requirements are sufficient.
Validated configuration: ASUS
| 2 | AMD EPYC 7313 (3,00 GHz, 16-Core, 128 MB) |
| 16 | 32GB ECC Reg ATP DDR4 3200 RAM |
| 5 | 6.4 TB NVMe Kioxia SSD 3D-NAND TLC U.3 (Kioxia CM6-V) |
| 1 | Asus Mainboard KMPP-D32 Series (without OCP 3.0, without Pike) |
| 2 | 1600 Watt redundant PSU |
| 1 | Broadcom 25 Gigabit P225P SFP28 Dual Port Network Card |
Validated configuration: Gigabyte
| 1 | Gigabyte R182-Z93 Mercury RM110 1U Rackmount Server |
| 2 | AMD EPYC 7413 2.64 GHz, 24 Core, 180W |
| 16 | 32GB 3200MHz DDR4 RDIMM |
| 10 | 7.68TB SAMSUNG MZWLJ7T6HALA-0000 NVMe SSD (exceeds storage requirements) |
| 2 | 1200W Redundant PSU 80 Plus Platinum Level |
| 1 | Dual Ethernet Intel I350 Gigabit Network Connection |
Validated configuration: Supermicro
| 1 | Supermicro AS-1124US-TNRP 1U Rackmount Server |
| 2 | AMD EPYC 7543 32-Core Processor 2.8 GHz, 225W |
| 16 | 64GB 3200MHz DDR4 RDIMM |
| 10 | 7.68TB Micron NVMe SSD |
| 2 | 1200W Redundant PSU 80 Plus Platinum Level |
| 1 | Dual Ethernet Intel X710 10GBASE-T Network Adapter |