Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen2 Supermicro"
From Internet Computer Wiki
m |
|||
Line 51: | Line 51: | ||
The system will now reboot. Please do not unplug the IC-OS USB stick at this point. | The system will now reboot. Please do not unplug the IC-OS USB stick at this point. | ||
− | == Boot the IC-OS USB image == | + | == 5. Boot the IC-OS USB image == |
# Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed. | # Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed. | ||
#: [[File:UEFI_Gen2_Supermicro_Post_Screen.png|580px]] | #: [[File:UEFI_Gen2_Supermicro_Post_Screen.png|580px]] | ||
Line 59: | Line 59: | ||
#: [[File:SM-35.png|580px]] | #: [[File:SM-35.png|580px]] | ||
<br> | <br> | ||
− | |||
− | * If using the legacy HSM onboarding procedure, return to the [[NitroKey HSM installation runbook# | + | == Return to the Installation Runbook: == |
+ | |||
+ | * If using the '''non-HSM''' onboarding procedure, return to the [[IC-OS Installation Runbook#8. UEFI Setup and Boot Menu|IC-OS Installation Runbook]]. | ||
+ | |||
+ | * If using the '''legacy, HSM''' onboarding procedure, return to the [[NitroKey HSM installation runbook#8. UEFI Setup and Boot Menu|NitroKey HSM installation runbook]] |
Revision as of 14:40, 18 July 2023
1. UEFI - Enter Setup
- Reboot or power on the server.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed.
- If your option is recognized by the system, it will say: "Entering Setup…"
2. UEFI - Check Version
- Check the version number at the bottom of the screen. Ensure the UEFI/BIOS version is 2.21.1280 or higher. This version was tested and found to support features required for IC-OS.
- Is your version lower than 2.21.1280? Download the latest version and follow the included instructions at the Supermicro support site
3. UEFI - Advanced Settings
- Change to the Advanced menu. Then select Boot Feature and press enter
- Set Wait For "F1" If Error to Disabled; press ESC (escape) to return to previous menu
- Select ACPI Settings and press enter
- Set PCI AER Support to Enabled; set NUMA Nodes Per Socket to NPS0 ; press ESC (escape) to return to previous menu
- Select CPU Configuration and press enter
- Set SMEE to Enabled
- Set SEV-ES ASID Space Limit Control to Manual
- Set SEV-ES ASID Space Limit to 100
- Set SNP Memory (RMP Table) Coverage to Enabled
- Press ESC (escape) to return to previous menu
- Select NB Configuration and press enter
- Set SEV-SNP Support to Enabled
- Select xGMI Configuration and press enter
- Set xGMI Max Speed to Auto; press ESC twice (escape) to return to previous previous menu
- Select PCIe/PCI/PnP Configuration and press enter
- Set SR-IOV Support to Enabled
4. UEFI - Boot Menu
- Change to the Boot menu; Set Boot Mode Select to UEFI
- Change to Save & Exit menu, then select Save Changes and Reset and press enter
- Select Yes at the prompt and press enter.
The system will now reboot. Please do not unplug the IC-OS USB stick at this point.
5. Boot the IC-OS USB image
- Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed.
- If the keypress was recognized by the system, it will print Invoking Boot Menu
- In the boot menu, select the first partition on the USB device and press enter, e.g.:
Return to the Installation Runbook:
- If using the non-HSM onboarding procedure, return to the IC-OS Installation Runbook.
- If using the legacy, HSM onboarding procedure, return to the NitroKey HSM installation runbook