IC-OS Installation - UEFI Configuration - Gen2 Gigabyte

From Internet Computer Wiki
Revision as of 23:11, 26 July 2023 by Andrew.battat (talk | contribs) (Add correct images)
Jump to: navigation, search

1. UEFI - Enter Setup

  1. Reboot or power on the server.
  2. Watch for the screen with the Gigabyte logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed.
    Gigabyte loading screen.jpg

2. UEFI - Check Version

  1. Check the version number at the bottom of the screen. Ensure the UEFI/BIOS version is 2.21.1280 or higher. This version was tested and found to support features required for IC-OS.
    • Is your version lower than 2.21.1280? Download the latest version and follow the included instructions at the Supermicro support site
  • TOO FIX WITH GIGABYTE SUPPORT

3. UEFI - Advanced Settings

  1. Change to the Advanced menu. Then select PCI Subsystem Settings and press enter

Gigabyte bios 15.jpg

  1. Set SR-IOV Support to Enabled (scroll to bottom of page)
    Gigabyte bios 16.jpg
  2. Select Trusted Computing
    Gigabyte bios 17.jpg
  3. Set Security Device Support to Enabled
  4. Set SHA256 PCR Bank to Enabled
  5. Set Platform Hierarchy to Enabled
  6. Set Storage Hierarchy to Enabled
  7. Set Endorsement Hierarchy to Enabled
    Gigabyte bios 18.jpg

4. UEFI - AMD CBS

  1. Change to the AMD CBS menu. Then select CPU Common Options and press enter
    Gigabyte bios CPU common options.jpg
  2. Set SMEE to Enabled
  3. Set SEV-ES ASID Space Limit Control to Manual
  4. Set SEV-ES ASID Space Limit to 100
  5. Set SNP Memory (RMP Table) Coverage to Enabled
    Gigabyte bios 12.jpg
  6. Press ESC (escape) to return to previous menu
  7. Select NBIO Common Options and press enter
    Gigabyte bios 13.jpg
  8. Set SEV-SNP Support to Enabled
    Gigabyte bios 14.jpg

5. UEFI - Boot Menu

  1. Change to the Boot menu; Set Boot Mode Select to UEFI
    Gigabyte bios 19.jpg
  2. Change to Save Changes and Exit, then select Yes' at the prompt and press enter.
    Gigabyte bios 21.jpg

The system will now reboot. Please do not unplug the IC-OS USB stick at this point.

6. Boot the IC-OS USB image

  1. Watch for the screen with the Gigabyte logo and boot options underneath it. Press F10 a couple of times, once the options are listed.
    Gigabyte loading screen.jpg
  2. In the boot menu, select the first partition on the USB device and press enter, e.g.:
    Gigabyte bios 22.jpg


Return to the Installation Runbook

Retrieved from "https://wiki.internetcomputer.org/w/index.php?title=IC-OS_Installation_-_UEFI_Configuration_-_Gen2_Gigabyte&oldid=6061"