Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen2 ASUS"
From Internet Computer Wiki
| Line 58: | Line 58: | ||
#Set '''SEV-SNP Support''' to '''Enabled''' | #Set '''SEV-SNP Support''' to '''Enabled''' | ||
#:[[File:Screenshot 2023-08-04 at 10.06.52 AM.png|580px]] | #:[[File:Screenshot 2023-08-04 at 10.06.52 AM.png|580px]] | ||
| − | # Press '''escape''' | + | # Press '''escape''' twice to return to the '''Advanced''' main menu. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
#Select '''CPU Configuration''' and press '''enter''' | #Select '''CPU Configuration''' and press '''enter''' | ||
| + | #:[[File:Screenshot 2023-08-09 at 2.42.55 PM.png|580px]] | ||
#Set '''SVM Mode''' to '''Enabled''' | #Set '''SVM Mode''' to '''Enabled''' | ||
#:[[File:Giga bios SVM.png|580px]] | #:[[File:Giga bios SVM.png|580px]] | ||
| + | #Press '''escape''' to return to the '''Advanced''' main menu. | ||
#Select '''PCI Subsystem Settings''' and press '''enter''' | #Select '''PCI Subsystem Settings''' and press '''enter''' | ||
| − | #:[[File: | + | #:[[File:Screenshot 2023-08-09 at 2.46.20 PM.png|580px]] |
| − | #Set '''SR-IOV Support''' to '''Enabled''' | + | # Set '''SR-IOV Support''' to '''Enabled''' |
| − | #:[[File: | + | #:[[File:Screenshot 2023-08-09 at 2.49.14 PM.png|580px]] |
# Press '''escape''' to return to the '''Advanced''' main menu. | # Press '''escape''' to return to the '''Advanced''' main menu. | ||
| Line 84: | Line 78: | ||
The system will now reboot. Please do not unplug the IC-OS USB stick at this point. | The system will now reboot. Please do not unplug the IC-OS USB stick at this point. | ||
| − | ==6. Boot the IC-OS USB image== | + | == 6. Boot the IC-OS USB image== |
#Watch for the screen with the Gigabyte logo and boot options underneath it. Press F10 a couple of times, once the options are listed. | #Watch for the screen with the Gigabyte logo and boot options underneath it. Press F10 a couple of times, once the options are listed. | ||
#:[[File:Gigabyte loading screen.jpg|580px]] | #:[[File:Gigabyte loading screen.jpg|580px]] | ||
| − | # In the boot menu, select the ''first partition on the USB device'' and press '''enter''', e.g.: | + | #In the boot menu, select the ''first partition on the USB device'' and press '''enter''', e.g.: |
#:[[File:SM-35.png|580px]] | #:[[File:SM-35.png|580px]] | ||
Revision as of 19:54, 9 August 2023
1. UEFI - Enter Setup
- Reboot or power on the server.
- Watch for the screen with the ASUS logo. Press DEL (delete) a couple of times to enter the setup menu.
2. UEFI - Check Version
- Check the version number at the bottom of the screen. Ensure the UEFI/BIOS version is 2.21.1280 or higher. This version was tested and found to support features required for IC-OS.
- Is your version lower than 2.21.1279? Download the latest version and follow the included instructions at the ASUS support site
3. UEFI - Advanced Settings
- Change to the Advanced menu.
- Select Trusted Computing
- Set Security Device Support to Enabled
- Set SHA256 PCR Bank to Enabled
- Set Platform Hierarchy to Enabled
- Set Storage Hierarchy to Enabled
- Set Endorsement Hierarchy to Enabled
- Note: your Trusted Computing bios page may look slightly different
- Press escape to return to the Advanced main menu.
- Select AMD CBS and press enter
- Select CPU Common Options and press enter
- Set SEV ASID Count to 253 ASIDs
- Set SEV-ES ASID Space Limit Control to Manual
- Set SEV-ES ASID Space Limit to 100
- Set SNP Memory (RMP Table) Coverage to Enabled
- Set SMEE to Enabled
- Select Performance
- Set SMT Control to Enabled
- Press escape twice to return to the AMD CBS main menu.
- Select DF Common Options and press enter
- Select Memory Addressing and press enter
- Set NUMA nodes per socket to NPS0
- Press escape twice to return to the AMD CBS main menu.
- Select UMC Common Options and press enter
- Select DDR4 Common Options and press enter
- Select Security and press enter
- Set TSME to Disabled
- Press escape three times to return to the AMD CBS main menu.
- Select NBIO Common Options and press enter
- Set Enable AER Cap to Enabled
- Set SEV-SNP Support to Enabled
- Press escape twice to return to the Advanced main menu.
- Select CPU Configuration and press enter
- Set SVM Mode to Enabled
- Press escape to return to the Advanced main menu.
- Select PCI Subsystem Settings and press enter
- Set SR-IOV Support to Enabled
- Press escape to return to the Advanced main menu.
5. UEFI - Boot Menu
- Change to the Boot menu. Then set Boot Mode Select to UEFI
- Select Save Changes and Exit, then select Yes' at the prompt and press enter.
The system will now reboot. Please do not unplug the IC-OS USB stick at this point.
6. Boot the IC-OS USB image
- Watch for the screen with the Gigabyte logo and boot options underneath it. Press F10 a couple of times, once the options are listed.
- In the boot menu, select the first partition on the USB device and press enter, e.g.:
Return to the Installation Runbook
- If using the non-HSM onboarding procedure, return to the IC-OS Installation Runbook.
- If using the legacy, HSM onboarding procedure, return to the NitroKey HSM installation runbook