Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen1 Supermicro"
From Internet Computer Wiki
m |
|||
Line 46: | Line 46: | ||
+ | == Return to the Installation Runbook == | ||
− | + | * If using the '''non-HSM''' onboarding procedure, return to the [[IC-OS Installation Runbook#8. UEFI Setup and Boot Menu|IC-OS Installation Runbook]]. | |
− | * If using the legacy HSM onboarding procedure, return to the [[NitroKey HSM installation runbook# | + | * If using the '''legacy, HSM''' onboarding procedure, return to the [[NitroKey HSM installation runbook#8. UEFI Setup and Boot Menu|NitroKey HSM installation runbook]] |
Revision as of 14:41, 18 July 2023
1. UEFI - Enter Setup
- Reboot or power on the server.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed.
- If your option is recognized by the system, it will say: Entering Setup…
2. UEFI - Advanced Settings
- Change to the Advanced menu. Then select Boot Feature and press enter
- Set Wait For "F1" If Error to Disabled ; press ESC (escape) to return to previous menu
- Select ACPI Settings and press enter
- Set PCI AER Support to Enabled ; set NUMA Nodes Per Socket to NPS0 ; press ESC (escape) to return to previous menu
- Select CPU Configuration and press enter
- Set SMEE to Enabled; press ESC (escape) to return to previous menu
- Select NB Configuration and press enter
- Set 4-link xGMI max speed to Auto; press ESC (escape) to return to previous menu
- Select PCIe/PCI/PnP Configuration and press enter
- Set SR-IOV Support to Enabled; Set NVMe Firmware Source to AMI Native Support; Set M.2 (ACPI) Firmware Source to AMI Native Support; Press ESC (escape) to return to previous menu
3. UEFI - Boot Settings
- Change to the Boot menu; Set Boot Mode Select to UEFI
- Change to Save & Exit menu, then select Save Changes and Reset and press enter
- Select Yes and press enter. The system will now reboot. Please do not unplug the IC-OS USB stick at this point.
4. Booting the USB image
Please remember to check the Possible Node Onboarding Errors page if you encounter any errors onboarding.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be saying Invoking Boot Menu
- In the Boot Menu, select the first partition on the USB device and press enter
Return to the Installation Runbook
- If using the non-HSM onboarding procedure, return to the IC-OS Installation Runbook.
- If using the legacy, HSM onboarding procedure, return to the NitroKey HSM installation runbook