Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen1 Supermicro"
From Internet Computer Wiki
m |
m |
||
Line 1: | Line 1: | ||
− | =1. UEFI - Enter Setup= | + | ==1. UEFI - Enter Setup== |
#Reboot or power on the server. | #Reboot or power on the server. | ||
#Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed. | #Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed. | ||
Line 6: | Line 6: | ||
#:[[File:SM-17.png|280px|screenshot]] | #:[[File:SM-17.png|280px|screenshot]] | ||
− | =2. UEFI - Advanced Settings= | + | ==2. UEFI - Advanced Settings== |
#Change to the Advanced menu. Then select Boot Feature and press enter | #Change to the Advanced menu. Then select Boot Feature and press enter | ||
#:[[File:SM-18.png|580px|screenshot]] | #:[[File:SM-18.png|580px|screenshot]] | ||
Line 28: | Line 28: | ||
#:[[File:SM-26.png|580px|screenshot]] | #:[[File:SM-26.png|580px|screenshot]] | ||
− | =3. UEFI - Boot Settings= | + | ==3. UEFI - Boot Settings== |
#Change to the Boot menu; Set '''Boot Mode Select''' to '''UEFI''' | #Change to the Boot menu; Set '''Boot Mode Select''' to '''UEFI''' | ||
#:[[File:SM-27.png|580px|screenshot]] | #:[[File:SM-27.png|580px|screenshot]] | ||
Line 36: | Line 36: | ||
#:[[File:SM-31.png|580px|screenshot]] | #:[[File:SM-31.png|580px|screenshot]] | ||
− | =4. Booting the USB image= | + | ==4. Booting the USB image== |
Please remember to check the [[Possible Node Onboarding Errors]] page if you encounter any errors onboarding. | Please remember to check the [[Possible Node Onboarding Errors]] page if you encounter any errors onboarding. | ||
#Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed. | #Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed. |
Revision as of 18:46, 17 July 2023
1. UEFI - Enter Setup
- Reboot or power on the server.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed.
- If your option is recognized by the system, it will say: Entering Setup…
2. UEFI - Advanced Settings
- Change to the Advanced menu. Then select Boot Feature and press enter
- Set Wait For "F1" If Error to Disabled ; press ESC (escape) to return to previous menu
- Select ACPI Settings and press enter
- Set PCI AER Support to Enabled ; set NUMA Nodes Per Socket to NPS0 ; press ESC (escape) to return to previous menu
- Select CPU Configuration and press enter
- Set SMEE to Enabled; press ESC (escape) to return to previous menu
- Select NB Configuration and press enter
- Set 4-link xGMI max speed to Auto; press ESC (escape) to return to previous menu
- Select PCIe/PCI/PnP Configuration and press enter
- Set SR-IOV Support to Enabled; Set NVMe Firmware Source to AMI Native Support; Set M.2 (ACPI) Firmware Source to AMI Native Support; Press ESC (escape) to return to previous menu
3. UEFI - Boot Settings
- Change to the Boot menu; Set Boot Mode Select to UEFI
- Change to Save & Exit menu, then select Save Changes and Reset and press enter
- Select Yes and press enter. The system will now reboot. Please do not unplug the IC-OS USB stick at this point.
4. Booting the USB image
Please remember to check the Possible Node Onboarding Errors page if you encounter any errors onboarding.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be saying Invoking Boot Menu
- In the Boot Menu, select the first partition on the USB device and press enter
Return to the IC-OS Installation Runbook
- If using the legacy HSM onboarding procedure, return to the NitroKey HSM installation runbook