Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen1 Supermicro"
From Internet Computer Wiki
(Created page with "==UEFI - Enter Setup== #Reboot or power on the server. #Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, onc...") |
m |
||
Line 44: | Line 44: | ||
#In the Boot Menu, select the first partition on the USB device and press enter | #In the Boot Menu, select the first partition on the USB device and press enter | ||
#:[[File:SM-35.png|580px|screenshot]] | #:[[File:SM-35.png|580px|screenshot]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Return to the [[IC OS Installation Runbook#6._UEFI_Setup_and_Boot_Menu|IC-OS Installation Runbook]] | Return to the [[IC OS Installation Runbook#6._UEFI_Setup_and_Boot_Menu|IC-OS Installation Runbook]] |
Revision as of 18:36, 17 July 2023
UEFI - Enter Setup
- Reboot or power on the server.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press DEL (delete) a couple of times, once the options are listed.
- If your option is recognized by the system, it will say: Entering Setup…
UEFI - Advanced Settings
- Change to the Advanced menu. Then select Boot Feature and press enter
- Set Wait For "F1" If Error to Disabled ; press ESC (escape) to return to previous menu
- Select ACPI Settings and press enter
- Set PCI AER Support to Enabled ; set NUMA Nodes Per Socket to NPS0 ; press ESC (escape) to return to previous menu
- Select CPU Configuration and press enter
- Set SMEE to Enabled; press ESC (escape) to return to previous menu
- Select NB Configuration and press enter
- Set 4-link xGMI max speed to Auto; press ESC (escape) to return to previous menu
- Select PCIe/PCI/PnP Configuration and press enter
- Set SR-IOV Support to Enabled; Set NVMe Firmware Source to AMI Native Support; Set M.2 (ACPI) Firmware Source to AMI Native Support; Press ESC (escape) to return to previous menu
UEFI - Boot Settings
- Change to the Boot menu; Set Boot Mode Select to UEFI
- Change to Save & Exit menu, then select Save Changes and Reset and press enter
- Select Yes and press enter. The system will now reboot. Please do not unplug the IC-OS USB stick at this point.
Booting the USB image
Please remember to check the Possible Node Onboarding Errors page if you encounter any errors onboarding.
- Watch for the screen with the Supermicro logo and boot options underneath it. Press F11 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be saying Invoking Boot Menu
- In the Boot Menu, select the first partition on the USB device and press enter
Return to the IC-OS Installation Runbook