Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen1 Dell"
From Internet Computer Wiki
m |
m |
||
| Line 1: | Line 1: | ||
| − | ==UEFI - Enter System Setup and reset IDRAC password== | + | ==1. UEFI - Enter System Setup and reset IDRAC password== |
#Reboot or power on the server. | #Reboot or power on the server. | ||
#Watch for the ''blue screen'' with boot options in the top left corner. | #Watch for the ''blue screen'' with boot options in the top left corner. | ||
| Line 25: | Line 25: | ||
#:[[File:20.png|580px|screenshot]] | #:[[File:20.png|580px|screenshot]] | ||
| − | ==UEFI - Boot Settings== | + | ==2. UEFI - Boot Settings== |
#:Select ''Boot Settings'' and press ''enter''. | #:Select ''Boot Settings'' and press ''enter''. | ||
| Line 33: | Line 33: | ||
#:[[File:22.png|580px|screenshot]] | #:[[File:22.png|580px|screenshot]] | ||
| − | ==UEFI - Integrated Devices== | + | ==3. UEFI - Integrated Devices== |
#:Select ''Integrated Devices'' and press ''enter''. | #:Select ''Integrated Devices'' and press ''enter''. | ||
| Line 43: | Line 43: | ||
#:[[File:24.png|580px|screenshot]] | #:[[File:24.png|580px|screenshot]] | ||
| − | ==UEFI - Miscellaneous Settings== | + | ==4. UEFI - Miscellaneous Settings== |
#:Select ''Miscellaneous Settings'' and press ''enter''. | #:Select ''Miscellaneous Settings'' and press ''enter''. | ||
| Line 58: | Line 58: | ||
#:Confirm the exit and press ''enter''. The system will reboot now. '''Please do not unplug the IC-OS USB stick''' at this point. | #:Confirm the exit and press ''enter''. The system will reboot now. '''Please do not unplug the IC-OS USB stick''' at this point. | ||
| − | ==Boot Manager - Enter Boot Manager== | + | ==5. Boot Manager - Enter Boot Manager== |
#:Watch for the Blue screen with boot options in the top left corner. Press ''F11'' a couple of times, once the options are listed. | #:Watch for the Blue screen with boot options in the top left corner. Press ''F11'' a couple of times, once the options are listed. | ||
Revision as of 18:47, 17 July 2023
1. UEFI - Enter System Setup and reset IDRAC password
- Reboot or power on the server.
- Watch for the blue screen with boot options in the top left corner.
- Press F2 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be highlighting Entering System Setup.
- In the System Setup, select iDRAC Settings and press enter.
- Select User Configuration and press enter.
- Select Change Password and press enter.
- Enter in your desired password and select OK.
- Select Back and Finish.
UEFI - System BIOS
- In the System Setup, select System BIOS and press enter.
- In the System BIOS, select Processor Settings and press enter.
- Set NUMA Nodes Per Socket to 0
- Set Minimum SEV non-ES ASID to 253
- Select back to return to System BIOS.
2. UEFI - Boot Settings
- Select Boot Settings and press enter.
- Set Boot Mode to UEFI
- Select back to return to System BIOS.
3. UEFI - Integrated Devices
- Select Integrated Devices and press enter.
- Set PCIe Preferred IO Bus to Enabled
- Set Enhanced Preferred IO to Enabled
- Set SR-IOV Global Enable to Enabled
- Select back to return to System BIOS.
4. UEFI - Miscellaneous Settings
- Select Miscellaneous Settings and press enter.
- Set F1/F2 Prompt on Error to Disabled
- Select back to return to System BIOS.
- Select Finish and press enter.
- Select Yes to save the changes and press enter.
- Select OK and press enter.
- Confirm the exit and press enter. The system will reboot now. Please do not unplug the IC-OS USB stick at this point.
5. Boot Manager - Enter Boot Manager
- Watch for the Blue screen with boot options in the top left corner. Press F11 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be highlighting Entering Boot Manager.
- In the Boot Manager, select One-shot UEFI Boot Menu and press enter.
- In the Boot Menu, select your USB device and press enter.
Return to the IC-OS Installation Runbook
- If using the legacy HSM onboarding procedure, return to the NitroKey HSM installation runbook