Difference between revisions of "IC-OS Installation - UEFI Configuration - Gen1 Dell"
From Internet Computer Wiki
(Created page with "==UEFI - Enter System Setup and reset IDRAC password== #Reboot or power on the server. #Watch for the ''blue screen'' with boot options in the top left corner. #Press F2 a cou...") |
m |
||
Line 71: | Line 71: | ||
Return to the [[IC OS Installation Runbook#6._UEFI_Setup_and_Boot_Menu|IC-OS Installation Runbook]] | Return to the [[IC OS Installation Runbook#6._UEFI_Setup_and_Boot_Menu|IC-OS Installation Runbook]] | ||
+ | |||
+ | * If using the legacy HSM onboarding procedure, return to the [[NitroKey HSM installation runbook#6.%20UEFI%20Setup%20and%20Boot%20Menu|NitroKey HSM installation runbook]] |
Revision as of 18:40, 17 July 2023
UEFI - Enter System Setup and reset IDRAC password
- Reboot or power on the server.
- Watch for the blue screen with boot options in the top left corner.
- Press F2 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be highlighting Entering System Setup.
- In the System Setup, select iDRAC Settings and press enter.
- Select User Configuration and press enter.
- Select Change Password and press enter.
- Enter in your desired password and select OK.
- Select Back and Finish.
UEFI - System BIOS
UEFI - Boot Settings
UEFI - Integrated Devices
UEFI - Miscellaneous Settings
- Select Miscellaneous Settings and press enter.
- Set F1/F2 Prompt on Error to Disabled
- Select back to return to System BIOS.
- Select Finish and press enter.
- Select Yes to save the changes and press enter.
- Select OK and press enter.
- Confirm the exit and press enter. The system will reboot now. Please do not unplug the IC-OS USB stick at this point.
Boot Manager - Enter Boot Manager
- Watch for the Blue screen with boot options in the top left corner. Press F11 a couple of times, once the options are listed.
- If your option is recognized by the system, it should be highlighting Entering Boot Manager.
- In the Boot Manager, select One-shot UEFI Boot Menu and press enter.
- In the Boot Menu, select your USB device and press enter.
Return to the IC-OS Installation Runbook
- If using the legacy HSM onboarding procedure, return to the NitroKey HSM installation runbook