ICP staking with seed phrase and air-gapped computer
Requirements
You can only stake with seed phrase and air-gapped computer if you are already doing ICP custody with seed phrase and air-gapped machine. This page assumes you are successfully doing self-custody of ICP as in that page.
This section assumes you successfully installed the QR tools on your air-gapped computer from ICP custody with seed phrase and air-gapped machine.
In this section, we need to “bridge the air gap.” This means that we will continue to perform the sensitive operations within the air-gapped computer, but we will use a networked smartphone’s QR code scanner to send the messages from the air-gapped computer to the Internet Computer.
Terminology
To “stake ICP” and to “create a neuron” are the same activity so they are used interchangeably.
Staking a neuron
Summary of steps
- Send ICP to your ledger account number
- Create a neuron
- Set dissolve delay of neuron
Step 1: Send ICP to your ledger account number
This account number lives in the Ledger canister that maintains the ICP addresses for the entire network. This account number is analogous to “addresses” in other blockchains. You need to send the ICP you want to stake to the ledger account number. In the example case, the ledger account 77b5eb9a465f4ce6f4da494ee2bfedeefe0b52d106e0272556c1ad991f99e3da so that is the address we will use.
To create a neuron, you need to stake a minimum of 1 ICP. Anything less will not create a neuron.
If you cannot send ICP to your ledger account number, do not continue. Try again, check out support, or submit a question to support.
Step 2: Create a neuron
Step 2a: Generate a signed message to “create a neuron” using quill
On the air-gapped computer:
/ This is just the structure, copy/pasting WILL NOT work. See below for working example of a command $ target/release/quill --pem-file private.pem neuron-stake --name $NAME --amount $AMOUNT
For this command, the $NAME is an arbitrary string, up to 8 characters, that you can use to identify your neuron for the purposes of topping up later with quill. For example, if you intend to have only one eight-year neuron, you could use the name 8yneuron. This string has no meaning otherwise, and will not be visible anywhere else. You can store the string on your air-gapped computer. It can in theory be recovered if lost but there is currently no tooling for recovery, so we recommend you also write the string down.
The $AMOUNT should not include the transaction fee, but remember that it will still be deducted from your account, so if you wish to stake everything you’ve got, stake your balance minus the 0.0001 ICP fee.
Here is the same command with the fields $NAME (“neuron3”) and $AMOUNT (1.01) filled out, but you should choose your own fields.
On the air-gapped computer:
// Create the message that tells IC "create the neuron" and save it in "message.json" $ target/release/quill --pem-file private.pem neuron-stake --name neuron3 --amount 1.01 > message.json
Step 2b: Bridge the air gap: Send the "create neuron" message to the Internet Computer using a QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
See Bridging the air gap with quill and QR codes
On your air-gapped computer terminal, press ENTER to get the next QR code to scan, repeat scanning and sending messages until there are no more.
When you do this, the browser on your smartphone will get a response with the id of the new neuron created.
After sending the message from IC Transaction scanner, do not close your browser window. Wait to get a response on IC Transaction Scanner that confirms the neuron was successfully created. A neuron id will come back to you as a response on the browser that looks like this:
(
record {
result = opt variant {
NeuronId = record { id = 5_241_875_388_871_980_017 }
};
},
)
In the example above, the neuron id is 5241875388871980017.
You can view your neuron on community dashboards like ic.rocks by going to URL: https://ic.rocks/neuron/
For example, neuron 5241875388871980017, https://ic.rocks/neuron/5241875388871980017
Step 3: Set dissolve delay of neuron
Now that you have a neuron, this section adds a dissolve delay to that neuron. Your ICP is not staked until the neuron has a dissolve delay.
Step 3a: Create a message to the neuron to add dissolve delay
To increase the dissolve delay of a neuron whose id is $NEURON_ID, we will use a command of the form:
// This is just the structure, copy/pasting WILL NOT work. See below for working command $ target/release/quill --pem-file private.pem neuron-manage $NEURON_ID --additional-dissolve-delay-seconds $SECONDS
This shows the neuron-manage subcommand, which is used to manipulate neurons after they have been staked. In this case, we are adding $SECONDS seconds to the delay time.
The following table gives typical values for $SECONDS:
| Length | number |
|---|---|
| Six months | 15778800 (60 seconds * 60 minutes * 24 hours * 182.625 days) |
| One year | 31557600 (60 seconds * 60 minutes * 24 hours * 365.25 days) |
| Four years | 126230400 (60 seconds * 60 minutes * 24 hours * 365.25 days * 4 years) |
| Eight years | 252460800 (60 seconds * 60 minutes * 24 hours * 365.25 days * 8 years) |
If you specify a dissolve delay longer than 8 years, it will be rounded down to 8 years.
In our example, we will start a 1-year dissolve, so we will use quill to craft the following command:
On the air-gapped computer:
// Add the dissolve delay $ target/release/quill --pem-file private.pem neuron-manage 5241875388871980017 --additional-dissolve-delay-seconds 31557600 > message.json // Using the bash script, create a QR code from the "message.json" file created by quill with your message $ bash ./quill-qr.sh < message.json
Step 3b: Send the message to the IC by bridging the air gap
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Add more ICP to the Neuron (“top up the neuron”)
Step 1: Create a message to the neuron to "top up the neuron"
Structure of command:
$ target/release/quill --pem-file private.pem neuron-manage $NEURON_ID --disburse
Command with example variables:
//Craft message to send 42 ICP to the neuron named "neuron3". Store in "message.json" $ target/release/quill --pem-file private.pem neuron-stake --name neuron3 --amount 42.20 > message.json // Using the bash script, create a QR code from the "message.json" file created by quill with your message $ bash ./quill-qr.sh < message.json
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Adding a hot key to the neuron
Step 1: Create a message to the neuron to "add hot key to the neuron"
XXXXXXX
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Set your neuron to vote or follow
Step 1: Create a message to the neuron to "follow another neuron"
XXXXXXX
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Collect your neuron’s voting rewards
Step 1: Create a message to the neuron to "spawn a neuron"
XXXXXXX
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Start the dissolve process
Step 1: Create a message to the neuron to "start the dissolve process"
Structure of command:
$ target/release/quill --pem-file private.pem neuron-manage $NEURON_ID --start-dissolving
Command with example variables:
$ target/release/quill --pem-file private.pem neuron-manage 5241875388871980017 --start-dissolving > message.json // Using the bash script, create a QR code from the "message.json" file created by quill with your message $ bash ./quill-qr.sh < message.json
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Stop the dissolve process
Step 1: Create a message to the neuron to "stop the dissolve process"
Structure of command:
$ target/release/quill --pem-file private.pem neuron-manage $NEURON_ID --stop-dissolving
Command with example variables:
$ target/release/quill --pem-file private.pem neuron-manage 5241875388871980017 --stop-dissolving > message.json // Using the bash script, create a QR code from the "message.json" file created by quill with your message $ bash ./quill-qr.sh < message.json
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).
Disbursing ICP from a neuron
You can disburse the ICP from a neuron if any of the following are true:
a. Neuron was created without a dissolve delay
b. Neuron was created with dissolve delay, but it has dissolved longer than the dissolve delay.
Step 1: Create a message to the neuron to "disburse the ICP"
Structure of command:
$ target/release/quill --pem-file private.pem neuron-manage $NEURON_ID --disburse Command with example variables: On the '''air-gapped computer''': $ target/release/quill --pem-file private.pem neuron-manage 5241875388871980017 --disburse > message.json
// Using the bash script, create a QR code from the "message.json" file created by quill with your message $ bash ./quill-qr.sh < message.json Note: this command typically requires only one QR code being sent.
Step 2: Send the message to the IC via QR code
Since your air-gapped computer is not connected to the internet, we will use a QR app to send the message generated above to the Internet Computer. We will use IC Transaction Scanner which lives in a canister (and whose code is visible here: https://github.com/ninegua/ic-qr-scanner).