Retrieving a Dell TSR Log
From Internet Computer Wiki
When Dell is called to service a server, they will ask for the service tag. This is the serial number for the server which is listed on the pull-out tag of the server.
They will also frequently ask for a TSR log. Here are several sets of directions that may be needed, depending on the situation:
- Export a SupportAssist collection via iDRAC9
- Changing the Integrated Dell Remote Access Controller 9 (iDRAC9) default login password
- This information from Dell may also be helpful if you need to reset it with KVM connected.
- If the faulty server is not allowing access to the iDRAC, then the Lifecycle Controller can be used to pull a TSR log and export it to a USB using these directions from Dell.
- Note that if this is the first time the lifecycle controller has been launched, you will be greeted with a 5-step setup wizard. One of the steps includes network configuration. For this, everything must be left back, but they are forced to choose a NIC interface in a dropdown menu. In that dropdown menu, please have them select a NIC interface that is empty.
- Here is how you can use a USB to perform a firmware update. For the following method to work please download the .efi file, a screenshot of the correct one to download is here.
- Copy the file to a USB device
- Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
- Navigate to the System Utilities menu and select BIOS Update File Explorer
- Select the USB device and navigate through the directory contents to find the executable (.efi)
- Launch the executable and follow the instructions provided by the flash utility.
