Difference between revisions of "Node Provider Machine Hardware Guide"
From Internet Computer Wiki
Katie.peters (talk | contribs) m |
Gary.mcelroy (talk | contribs) (Added Gen2 section - generic spec's and ASUS config. Reformatted headers.) |
||
Line 1: | Line 1: | ||
− | + | = What are the Hardware Requirements to be a Node Provider? = | |
Presented here are the hardware requirements for all nodes that were purchased prior to Genesis. | Presented here are the hardware requirements for all nodes that were purchased prior to Genesis. | ||
Hardware requirements for new nodes are currently [https://forum.dfinity.org/t/draft-motion-proposal-new-hardware-specification-and-remuneration-for-ic-nodes/14202 under discussion] as they must be approved by the NNS. <br> | Hardware requirements for new nodes are currently [https://forum.dfinity.org/t/draft-motion-proposal-new-hardware-specification-and-remuneration-for-ic-nodes/14202 under discussion] as they must be approved by the NNS. <br> | ||
<br> | <br> | ||
− | + | == Gen 1 == | |
− | + | === Node Type 1 - Dell === | |
− | + | ||
− | |||
− | === Node Type 1 | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
Line 37: | Line 35: | ||
<br> | <br> | ||
<br> | <br> | ||
− | === Node Type 1 | + | === Node Type 1 - SuperMicro === |
+ | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
Line 58: | Line 57: | ||
<br> | <br> | ||
<br> | <br> | ||
− | === Node Type 2 | + | === Node Type 2 - Dell === |
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
Line 86: | Line 85: | ||
|- | |- | ||
| 2 || Jumper Cord - C13/C14, .6M, 250V, 13A | | 2 || Jumper Cord - C13/C14, .6M, 250V, 13A | ||
+ | |} | ||
+ | |||
+ | == Gen 2 == | ||
+ | === Generic specification === | ||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | | Dual Socket AMD EPYC 7313 Milan 16C/32T 3 Ghz, 32K/512K/128M | ||
+ | optionally 7343, 7373, 73F3 | ||
+ | |- | ||
+ | | 16x 32GB RDIMM, 3200MT/s, Dual Rank | ||
+ | |- | ||
+ | | 5x 6.4TB NVMe Mixed Mode | ||
+ | |- | ||
+ | | Dual Port 10G SFP or BASE-T | ||
+ | |- | ||
+ | | TPM 2.0 | ||
+ | |} | ||
+ | <br> | ||
+ | === Validated configuration: ASUS === | ||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | | 2 || AMD EPYC 7313 (3,00 GHz, 16-Core, 128 MB) | ||
+ | |- | ||
+ | | 16 || 32GB ECC Reg ATP DDR4 3200 RAM | ||
+ | |- | ||
+ | | 5 || 6.4 TB NVMe Kioxia SSD 3D-NAND TLC U.3 (Kioxia CM6-V) | ||
+ | |- | ||
+ | | 1 || Asus Mainboard KMPP-D32 Series (without OCP 3.0, without Pike) | ||
+ | |- | ||
+ | | 2 || 1600 Watt redundant PSU | ||
+ | |- | ||
+ | | 1 || Broadcom 25 Gigabit P225P SFP28 Dual Port Network Card | ||
|} | |} |
Revision as of 17:00, 30 August 2022
What are the Hardware Requirements to be a Node Provider?
Presented here are the hardware requirements for all nodes that were purchased prior to Genesis.
Hardware requirements for new nodes are currently under discussion as they must be approved by the NNS.
Gen 1
Node Type 1 - Dell
1 | R6525 |
1 | Chassis - Supports Up to 10 NVMe drives, 12 drives total |
1 | Dual 1 GB on Motherboard |
3 | Low Profile PCIe Slots |
- | 3 Year Basic NBD Support |
- | iDrac Enterprise |
1 | Dual port 10GbE Base - T Adapter Broadcom, PCIe Low Profile |
10 | 3.2TB NVMe, Mixed Use, 2.5" with Carrier |
16 | 32GB RDIMM (3200MT/s) |
2 | AMD 7302 3GHz, 16C/32T, 128M, 155W, 3200 |
1 | Single Power Supply (800W) |
1 | C13-C14, 3M, 125V 15A Power Cored |
Node Type 1 - SuperMicro
1 | AS - 1023US - TR4 |
2 | Rome 7302 DP/UP 16C/32T 3.0 |
16 | 32GB DDR4-3200 2Rx4 ECC REG DIMM |
5 | Samsung PM983 3.2TB NVMe PCIE/SATA Hybrid M.2 & 1 PCIE |
2 | 800W Power Supply |
1 | Std LP 2-port 10G RJ45, Intel x540 |
5 | Micron 5300 PRO 7.4TB, SATA, 2.5', 3D TLC, .6DWPD (with Caddie) |
1 | C13/C14 13A Power Cord |
Node Type 2 - Dell
1 | R6515 |
1 | 3.5" Chassis with up to 4 Hot-Plug Hard Drives and OS RAID |
1 | Dual 1 Gb on Motherboard |
3 | Low Profile PCIe Slots |
1 | Standard Fan |
- | 3 Year Basic NBD Support |
- | iDrac Enterprise |
2 | Dual Port 10GbE Base - T Adapter Broadcom, PCIe LOw Profile |
2 | 480GB SSD SATA Mix Use 6Gbps 512 2.5in Hot-Plug AG Drive, 3.5in |
4 | 8GB RDIMM, 3200 MT/s, Single Rank |
1 | AMD EPYC 7232P 3.10GHz, 8C/16T, 64M Cache (120W) DDR4-3200 |
1 | Dual Hot-Plug Redundant Power Supply (1+1), 550W |
2 | Jumper Cord - C13/C14, .6M, 250V, 13A |
Gen 2
Generic specification
Dual Socket AMD EPYC 7313 Milan 16C/32T 3 Ghz, 32K/512K/128M
optionally 7343, 7373, 73F3 |
16x 32GB RDIMM, 3200MT/s, Dual Rank |
5x 6.4TB NVMe Mixed Mode |
Dual Port 10G SFP or BASE-T |
TPM 2.0 |
Validated configuration: ASUS
2 | AMD EPYC 7313 (3,00 GHz, 16-Core, 128 MB) |
16 | 32GB ECC Reg ATP DDR4 3200 RAM |
5 | 6.4 TB NVMe Kioxia SSD 3D-NAND TLC U.3 (Kioxia CM6-V) |
1 | Asus Mainboard KMPP-D32 Series (without OCP 3.0, without Pike) |
2 | 1600 Watt redundant PSU |
1 | Broadcom 25 Gigabit P225P SFP28 Dual Port Network Card |